Prof. Dr. Anthimos Georgiadis

21335 Lüneburg, Universitätsallee 1, 12.309
Fon +49.4131.677-1880, anthimos.georgiadis@leuphana.de

Table of contents for this page

Vita

• 2011 - 2019 Managing Director of the Institute for Product and Process Innovation

• 2004: Honorary Professor of the National T.U. Izhevsk, Russia

• Since 2005 Professor of "Measurement and Intelligent Systems" at the Leuphana University of Luneburg”

• 2002 - 2005: Professor of "Measurement and Intelligent Systems" at the Department of Automation Technology FH NON (University of Applied sciences of North East Lower Saxony) *

• 2003 - 2004: Visiting Professor at the Democritus University of Thrace, Greece

• 1997 - 2003: Dean of the department of automation technology of the FH NON (University of Applied sciences of North East Lower Saxony)

• 1995 - 2002: Professor of "Metrology and Electronics" at the Department of Automation Technology at the FH NON

• 1992 - 1995: Visiting Professor University of Thessaly

• 1990 - 1995: Co-founder and Managing Director of the Institute for Medical Laser Technologies in eye surgery (VEIC) of the University of Crete

• 1986 - 1992: Visiting Professor of Physics, University of Crete

• 1985: Graduation in Physics (PhD) University of Cologne

• 1980: Diploma Physics

• Studied physics at the RWTH Aachen and Cologne

 

* This Institution does not exist today but it merged 2005 with the previous University of Luneburg to the now “Leuphana University of Luneburg”.

Teaching

Process measuring technology, sensors, intelligent systems, microsystems, physics and engineering in our time

Research Interests

Automation technologies, measurement in manufacturing, methods and systems for increasing the quality of life (food, air, medicine) and the safety (automobile, fire protection). Measurement methods and techniques, sensors (also based on nanofiber), multisensory systems and corresponding microsystems, including intelligent applications in production (innovative processing techniques), process monitoring for error-free production („ zero defect manufacturing “), X-ray detection systems for basic research in QED.

Projects

  1. Roboterbasiertes Fräsen
    Anthimos Georgiadis (Project manager, academic)
    →

    Project: Transfer (Scientific Services)

  2. Robonatives Initiative Roll Out Nordostniedersachsen
    Anthimos Georgiadis (Project manager, academic) , Nora Heinig-Niemeyer (Project staff)
    →

    Project: Research

  3. Kofi RoboNord (ESF) öffentl. Zuschussg.
    Anthimos Georgiadis (Project manager, academic)
    →

    Project: Other

  4. Optimierung der roboterbasierten, hybriden Fertigung
    Anthimos Georgiadis (Project manager, academic) , Paolo Mercorelli (Project manager, academic) , Benedikt Haus (Project staff) , Lennart Schäfer (Project staff) , Jin Siang Yap (Project staff)
    →

    Project: Research

  5. diZi-FTS - Development of a digital twin for the virtual commissioning of an FTS
    Anthimos Georgiadis (Project manager, academic) , Paolo Mercorelli (Project manager, academic) , Nicolas Meier (Project manager, academic) , Roman Krämer (Project staff) , (Project staff)
    →

    Project: Transfer (R&D project)

View all projects

Publications

Journal contributions

  1. Non-Invasive Failure Detection in Electric Parking Brake Modules
    Bartłomiej Ambrożkiewicz (Author) , Arkadiusz Syta (Author) , Łukasz Wójcik (Author) , Wataru Uemura (Author) , Anthimos Georgiadis (Author) , Grzegorz Litak (Author) , 01.08.2026 , in: Journal of Vibration and Acoustics, 148, 4 , 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  2. Stepwise-based optimizing approaches for arrangements of loudspeaker in multi-zone sound field reproduction
    Tong Zhou (Author) , Kazuya Yasueda (Author) , Ghada Bouattour (Author) , Anthimos Georgiadis (Author) , Akitoshi Kataoka (Author) , 01.01.2025 , in: Acoustical Science and Technology, 46, 1 , p. 11-21 , 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  3. Way out of the supply crises through risk minimisation – metrological comparison of two polypropylene materials and examination with Six Sigma methods
    Carsten Engler (Author) , Anthimos Georgiadis (Author) , Dirk Lange (Author) , Nicolas Meier (Author) , 01.01.2025 , in: International Journal of Productivity and Quality Management, 46, 4 , p. 458-480 , 23 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  4. Improving the surface quality of AlMgSi1 alloy with the selection of the appropriate vibration grinding stones
    Carsten Engler (Author) , Anthimos Georgiadis (Author) , Dirk Lange (Author) , Nicolas Meier (Author) , 01.12.2024 , in: Journal of Engineering and Applied Science, 71 , 20 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  5. Assistance systems for patient positioning in radiotherapy practice
    Ralf Müller-Polyzou (Author) , Melanie Reuter-Oppermann (Author) , Jasmin Feger (Author) , Nicolas Meier (Author) , Anthimos Georgiadis (Author) , 01.12.2024 , in: Health Systems, 13, 4 , p. 332-360 , 29 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

View all publications

Contributions to collected editions/anthologies

  1. Mathematical Model of Double Row Self-Aligning Ball Bearing
    Bartłomiej Ambrożkiewicz (Author) , Grzegorz Litak (Author) , Anthimos Georgiadis (Author) , Arkadiusz Syta (Author) , Nicolas Meier (Author) , Alexander Gassner (Author) , 01.01.2024 , p. 29-39 , 11 p.

    Research output: Contributions to collected editions/anthologies › Article in conference proceedings › Research › peer-review

  2. Machine Learning Analysis in the Diagnostics of the Dynamics of Ball Bearing with Different Radial Internal Clearance
    Bartłomiej Ambrożkiewicz (Author) , Arkadiusz Syta (Author) , Alexander Gassner (Author) , Anthimos Georgiadis (Author) , Grzegorz Litak (Author) , Nicolas Meier (Author) , 01.01.2023 Cham , p. 599-606 , 8 p.

    Research output: Contributions to collected editions/anthologies › Article in conference proceedings › Research › peer-review

  3. Digital twin support for laser-based assembly assistance
    Nicolas Meier (Author) , Ralf Müller-Polyzou (Author) , Leon Brach (Author) , Anthimos Georgiadis (Author) , 03.05.2021 Amsterdam , p. 460-465 , 6 p.

    Research output: Contributions to collected editions/anthologies › Article in conference proceedings › Research › peer-review

  4. A Comparative Study for Fisheye Image Classification: SVM or DNN
    Zhen Chen (Author) , Anthimos Georgiadis (Author) , 01.01.2021 , p. 424-433 , 10 p.

    Research output: Contributions to collected editions/anthologies › Article in conference proceedings › Research › peer-review

  5. Patient Positioning in Radiotherapy
    Wei Guo (Author) , Ralf Müller-Polyzou (Author) , Zhen Chen (Author) , Nicolas Meier (Author) , Anthimos Georgiadis (Author) , 01.06.2020 Piscataway , p. 1-6 , 6 p.

    Research output: Contributions to collected editions/anthologies › Article in conference proceedings › Research

View all publications

Activities

  1. Case study analysis of laser-assisted Low-Cost Automation assembly
    Ralf Müller-Polyzou (Speaker) , Anthimos Georgiadis (Speaker) , Nicolas Meier (Speaker)
    →

    Activity: Conference Presentations › Research

View all activities

Press / Media

Courses

Experimental methods in research and development
Anthimos Georgiadis
⌄
The seminar refers to the systematic procedures and steps followed in a research and development project to conduct experiments, gather data, and analyse results. It aims to provide a detailed description that allows other researchers to replicate the study and evaluate its validity and implement the results into the product development. This course covers an advanced treatment of experimental methods in the context of electro mechanical systems by way of example. Health and condition monitoring as well as predictive maintenance and resilience of production machines and systems are in the focus of the seminar. Students will study significant components of experimental apparatus or the hole system, use those to collect data or use collected data, interpret the resulting data, and write reports on the experiments. Assessment of the results in relation to the applied methods and comparison with alternatives follow in discussions.
Next appointment:
Wednesday, 2026-05-06 at 12:15
Room: C 14.102 b Seminarraum